Customer Project
Black and White Chair
Browse Projects
-
Estimated Time
2 Hours
-
Challenge Level
Intermediate
-
Tools & Supplies:
-
Mid-Century Danish Style Chair
-
Sandpaper
-
Staple Gun
-
Drill
-
Batting
-
Fabric Upholstery
-
Damp Cloth
-
- Remove the seat portion of the chair and lightly sand the chair to get it ready to spray paint.
- Wipe down chair after sanding with a damp cloth.
- Paint the chair with Rust-Oleum® Ultra Cover 2X Gloss Spray paint in Gloss Black.
- Reupholster seat, remove any excess layers of fabric that may have been added over the original fabric, this way when you go to place the batting and fabric it doesn't leave such a thick bunch around the back side that you can't reattach the seat.
- Place a layer of batting over seat and pull fairly tight and staple around on the back, starting in the middle of one side then going across to the opposite side and staple in the middle, and follow this method around the rest of the chair.
- Place the fabric the same way you did the batting, watching that you don't have too much fabric bulked up in the corner areas where you stapled everything.
- Now replace your seat using a drill and the screws you took out when you removed the seat.
- And wha-la there is your chair!